Ground Control

Ground Control is the program which allows you to control the Maslow CNC machine.

Maslow Firmware

This is the firmware which controls the Maslow CNC machine

Maslow Electronics

The printed circuit board which powers the Maslow CNC Machine

Maslow CNC Kit

The overall summary of the Maslow CNC machine

Community Garden Website

This is the code which generates the Maslow Community Garden website which you are most likely reading. Meta right?

The Default Frame

The default Maslow CNC frame

Maslow Ring System Sled

The design files for the Maslow ring system

The Meticulous Z-Axis

An improved Z-Axis sled that uses the Rigid R2200 as the spindle

TLE5206 PowerControl Boards

PowerControl board based on the TLE5206. Thru-hole and SMD versions

Maslow Mark II 3D

Basic drawings of table and gantry is provided to help in construction along with stl files of 3D printed parts. The Fusion360 f3D files are included to help in further modifications.

Ridgid Router 3D printed dust collector coupler

3D printable replacement dust collection coupler for Ridgid r2* series routers.

Z axis 37mm motor holder for C-Beam Open builds 40x80 aluminum profile. and motor mount.

easily mount a 37mm Zaxis motor on a 40x80 aluminum Cbeam.

Rigid Hose Adapter

A dust hose adapter and strain relief for the Rigid router

3D Printed Linkage

3D Printed Sled Linkage System

Original Maslow Sled Design

The original quadrilateral design for the sled

$75

Maslow Brains Motor Shield (formerly Blue Smoke Herder Shield)

Advance Maslow Motor Controller

Linkage Kit Sled Templates

Sled templates including the mounting holes for the different linkage kits

3D Printed Chain Guides

Sled with BUILT IN dust collector.

Dust collector built in to the Maslow CNC slide.

Drill depth equalizer

This will let you set drill depth the same for each drill/mill that you use during your project

Brad's 3D Printed Chain Guide

A 3D printed chain guide to help prevent chain skip.

Yet Another Z-Axis Mod

I had gotten the z-axis kit with my Maslow originally, but I frequently found it off of spec when cutting. I tried all the simple fixes (bungee cord, gluing a bushing to the frame to keep alignment), and while they helped, I still had trouble with incomplete cuts way too often.

Maslow Tablet Holder

Brackets to attach a cheap RCA to the frame to control Maslow

Chain Guide

A chain guide to increase chain engagement with the sprocket on the original frame

Chain Guide and Peeler

Combination chain guide and peeler for motor sprockets.

Help me with a design to convert the Maslow to a CNC Plasma Cutter for metal

If we replace the mount for the router to instead hold a normal hand held Plasma cutter torch head then we could use the Maslow CNC for cutting all sorts of metals too. There are already similar conversions to turn hand held plasma cutters into a flatbed plasma cutters driven with computer CNC controls. This design aspect is beyond my capabilities, but I know with help from people much smarter than me in this community that we can turn the Maslow into a CNC plasma cutter as well for a fraction of the price of existing plasma cutting tables. The design part of this project is beyond my skill set, but if there are people willing to help with that part, then I am will to build the prototype and help make their design concepts a reality. You can email me at creativecustoms.16(at)gmail(dot)com if you have any questions. Thanks Greg

Big Z-value display

Be able to see the current Z value of your maslow from all over the workshop

Bolt Together Maslow Frame

Bar's bolt together Maslow frame design

3d printed Router Clamps for MetalMaslow

90, 70, 65, 55mm router clamps

Maslow CNC with Panel Saw mod by John Montani.

This is a Sketchup model in 3d Warehouse of the Maslow CNC and my panel saw adapted to the Maslow frame. by John Montani

Sharpie Pen Holder by krkeegan

Sharpie Pen Holder that was originally created by krkeegan and is designed to hold the pen so that you can use the maslow to draw lines on the material.

Freecad Final Sled with CAM files

Is the Maslow Final sled for Freecad 0.17

Inexpensive fixes for z-axis slack imprecision on Maslow CNC

## Issues addressed:

* Eliminate play in z-axis worm

Maslow Chain guides

Chain guides for Maslow

Community Garden Robot

The robot which handles voting and merging pull requests on community projects

Ring and bit alignment

Simple pattern to align ring and router bit and reinforce ring mount

Sled With Center Alignment Jig

A version of the sled which leaves in the center part to help with router alignment

Maslow Electronics Case

A case for the Arduino and Maslow boards

3D Printed Chain guide and locking pin

A easy to print option using existing mounting points and screws and includes a hole to hook the loose end of chain.

EZ Motor Mounts

Design file used to make the Maslow EZ motor mount by Bee & Dlang

z-axis upgrade for AEG/Ridgid routers

Modification of AEG and Ridgid routers Z-axis for smoother and/or faster operation with a T8 lead screw.

Crosshair

I think you can see how it works.

Fold Flat Chair

A flat folding chair which is easy to store

Working Desk

An easy to build working desk, without using srews, made with 9mm plywood (also the uploaded files a prepared for 9mm material)

small BBQ table

small BBQ table. Can be disassembled and assembled.

Template Picnic Table

A template to construct a picnic table

Garage Shelf

Space saving curvy garage utility shelf with cutouts and support/alignment grooves, sized to fit in a narrow space under a light switch and top two shelves designed for puppy food. My first Maslow project. Designed with Autodesk Fusion360 for 1/2" ply. Had a few accuracy issues with the edges of Maslow cut area.

Fancy Cupcake Stand

This is the design files for a cupcake stand that can also be a free-standing display

CNC Cut Dish Rack

A CNC cut over-sink dish rack

A Simple Night Stand

A simple open source night stand

Sutro Tower Coat Rack

A coat rack of SF's sutro tower

Nazca Lines Bed

Nazca lines bed

Growth Ruler

Growth chart in the form of a larger ruler

Cupboard

I made a cupboard in 3D to make with maslow

Cub Scout Bridge

Collapsible bridge for use in Cub Scout bridging/graduation cermonies.

Wavy wall decoration

Wavy wood ribs that make a visual appealing frame to hang on the wall.

Flat Pack Bar Stool

A barstool that can put together and taken apart - Requires additional support for footrest and Seat

Forrest Gump Park Bench

Quick park bench inspired by the Forrest Gump bench.

Rocket Corner Shelf (with flame)

A corner shelf shaped like a rocket. The picture is of initial design. The current design has a smaller center shelf, so it does not overlap the side.

Standing Patio Railing Desk

Simple standing desk that attaches to a railing. No fasteners required for easy setup and storage.

Cat House

Interlocking skeleton cat house made of 10 mm plywood

Maslow Stool

Simple Stool with footrest and Maslow Logo - Slightly Altered

18" Wok Holder

A wok holder that hangs on the wall and holds 1 wok. Says "WOK" in Chinese on front.

End Table OpenSCAD Library

Code for generating end tables with any number of legs and any number of shelves.

Coat Hanger 1

This is a wall mounted hanger for coats.

Plant Shelf

Parametric plant shelf. The photographed version can be cut from a single sheet of plywood.

Flat Pack Bar Stool

A barstool that can put together and taken apart - Requires additional support for footrest and Seat

Basic-Box

This is a remix of: https://www.thingiverse.com/thing:3238988 but in normal fashion, Thingiverse can't find any results searching in the remix source files box.....

Mudroom Storage Bench

A storage bench to live in mudroom/entry way

Goat pedestal

A toy for my friend's mini goats, and a way to test a new fastener

Coat Hanger 2

This is a wall mounted hanger for coats. It is a different design than Coat Hanger 1

Bankers Shelf

Code for generating shelves designed for bankers boxes. This includes shelf units, end pieces, and connectors to join units. The goal is to support as many boxes as possible with the least amount of wood.

Cargo Box OpenSCAD Library

Code for generating cargo boxes.

Pentaflake Tabletop

Tabletop with CNC'd pattern filled with colored resin.

Finger Joint Letter Box

A letter box created by Rancher

Leaning Plywood Cart

This is a plywood "cart" cut from a single sheet of plywood that can lean forward against a wall to save space when not in use. This is a work in progress.

Standing Desk

Small, mostly parametric adjustable standing desk. Useful for a laptop and a few items.

Picnic Table To Go

A kids size flat pack picnic table.

Sunglasses Stand

Simple stand to hold multiple pairs of sunglasses.

Mail Organizer

12" x 18" wall-mounted mail organizer made from 1/2" plywood.

Wine Rack

A rack for wine

MCM End Table

Mid-Century inspired end table. Two can be cut out of one 4x8 sheet of material

Open Crutch

An open source CNC cut crutch which can be resized to be right for the person using it

Pour Over Coffee Stand

Stand to hold a single cup style pour over filter holder.

Victorian Architectural Details Repository

Place for easily CNC-able Victorian architectural details such as railings

PlyPad Module 3 (Bed)

PlyPad Module 3 with bed

PlyPad Module 1 (Desk)

The first PlyPad Module containing the desk

PlyPad Module 2 (Shelves)

Module two of the plypad containing shelves

Simple bat house

A one-chamber bat house optimized for Maslow

Maslow Logo

A quick and easy test project

Mickey Mouse

Mickey Mouse

Fortnite Sign

My Son is huge into Fortnite as am i honestly! Its a fun game we can play together and he loves playing with his friends. As im sure many of you know!!! This is one of my first projects with my new Maslow and i love it! It took quite a few hours to run. I ran into a slight bump issue on the O but just a little chisel fixed the issue and i was good to go! This is my first project upload and first time uploading to GitHub so bare with any missing info!!

Christmas - Grinch Family - Grinch

This is a Christmas Yard Art project. It is a 2 tool setup that is first drawn with the marker holder and then with the router (1/4 in bit).

Halloween Cat

Decorative Halloween Cat

Christmas - Grinch Family - Max

Max is 36 inches tall and is designed to use the maslow to draw the inside features and the router to cut him out.

Christmas - Grinch Family - Cindy Lou Who

This is a Christmas Yard Art project. It is a 2 tool setup that is first drawn with the marker holder and then with the router (1/4 in bit).

Decorative Jack-O-Lantern

Decorative Jack-O-Lantern

Cupcake Sign

Cupcake cutout, can be used as a birthday sign.

There are currently multiple companies selling Maslow kits or parts. All of the machines use the same basic design, but each kit offers slightly different hardware options. Click on any of the options below to learn more.


$1198

MakerMade M2 CNC

$439

Maslow cnc complete kit

Maslow by EastBaySource is an affordable large format (4x8 ft) DIY cnc machine.

$549

The Complete Maslow Basic Kit

Metal Maslow CNC kit

Original Maslow + Metal Sled, Cbeam Z axis, Arduino enclosure & more.

Our complete kit takes off where the orginal left off with many upgraded features and quicker assembly times.

$599.00

Maslow to M2 Upgrade Kit

$449.00

Laser Upgrade Kit

$45.00

Rigid Router

$27

Router Bits

MakerMade offers a variety of router bits to help you to pair with your CNC and bring your designs to life!

$59.00

15’ XL Drive Chains

A set of two, XL (15ft) drive chains for the Maslow or M2 CNC. For those looking to improve their cut accuracy at the edges of their frame (by pairing with a 12ft top beam), or create a work surface larger than the standard 4 x 8 ft Maslow frame.

$199.00

Complete DUE Board With Case

The upgraded M2 DUE Board and shield are here to take your Maslow to the next level! Improved tech makes this board a must for serious Maslow users.

$15

Maslow Accessories & Components

Find parts & accessories for your Maslow or M2!

$79

Sled Ring Kit

$100.00

M2 Dust Collection Sled

Our brand new custom milled, screen-printed sled created for the M2 and backwards compatible with Maslow. Featuring multiple layers of cross-stacked and lacquered, solid wood with a slick finish. This sled provides a smooth movement across your work surface, while collecting dust and chips in its built-in dust collection port.

$1198

M2 Sled Camera

$75

Shield v1.4 TLE5206

The latest shield v1.4 offers many improvements over it's predecessor.

$35

Maslow triangulation linkage kit

This is a kit to build a linkage system for a Maslow CNC machine that enables triangular kinematics (as opposed to quadrilateral kinematics) for more accurate cuts and a more stable router sled.

$599

M2 Spindle

$52

Maslow CNC Motor

One Motor/Encoder/Gear Box Unit. These are identical to the motors in the original Maslow kit and are surplus from the last batch of kits sold.

$36

Custom Made Sled Ring Bearings

One set of (4) sled ring bearings.

$54

Arduino Shield v1.2

The Maslow Arduino shield version 1.2b

$8

Medium Hardware Bag

A surplus Maslow hardware bag

$10

US Power Supply

Maslow Power Supply with US Plug

$10

EU Power Supply

Maslow power supply with EU plug

"calibration free" Laser Cut Motor Mounting Bars

Two 6 ft long bars with coupler and laser cut holes to mount the motors 10' or 12' apart

$5.99

Surplus L Bracket

This L bracket is used to attach the ring to the sled and two of them together are used to hold the z-axis motor.

Metal Maslow Sled & linkage kit

CNC Laser Cut 12 lb base with 7" long arm linkage kit & z axis compatable with most routers

SOLD OUT

Bosch POF1200 Top mount

Bosch POF 1200 Z-axis kit 2.0

$10

Carriage Brackets

One pair of Sled Ring Bearing Carriages to hold bearings as the roll along sled rings.

$2

Motor Gear Upgrade

Made with higher grade materials than original motors. Direct from manufacturer.

$10

Hardware set #3

Surplus hardware bag from Maslow kits

$14.99

Mega 2560 R3

One Keyestudio MEGA 2560 R3 micro controller (Arduino compatible) with USB cord + extension to connect to your computer.

Tabletop Arcade

2 player Raspberry Pi arcade cabinet.

Red Wagon Fighter Jet

Convert a red wagon into a fighter jet

I love Oregon Cornhole

A corn hole board for those who love Oregon

Storage Rack for Plastic Organisers

A easy to build rack for plastic storage trays

Wave Joint

Simple cut to joint to pieces.

Clamp for DUST HOSE 2.75 in (72.489 MM)

Clamp for dust hose made with 3/8 inch ply.

Arduino Plug

Cap to cover the Arduino Power port so you can only plug power into the correct port on the Maslow shield.

Vacuum Hose Clamp

Vacuum hose clamp 2.25 inch. All files for this project were generated using ONSHAPE. Here is a link to a great video that will get you started using Onshape and Kiri Moto. [YouTube](https://www.youtube.com/watch?v=mt2JFI3vJso). All files are available in ONSHAPE: [OnShape](https://cad.onshape.com/documents/c3ab435f61bcc21bbd556cac/w/c1cbaf26518b004a9ae82ac1/e/3198fb38a1df3692237814ab)

Router Bungie Cap - Creative Commons License, attribution

3D printed Cap to keep bungie cords over the top of your router.

1990 Volvo 240 Radio Insert

The insert which holds the radio in place in a 1990 Volvo 240

3D Printed Router Bit Holder for Peg Board

Printing this piece will allow you to mount your bits in their case to a peg board

Slab Flattening Router Jig

This project will allow you to build a jig to process large rough-cut slabs of lumber for use in your other projects

Nightmare Before Christmas Figures

Nightmare Before Christmas Figures

Wire Dispenser with 3d Printed Spools

A easy way to organise small wires that usually just come as a bundle. I used 12mm ply and cut the slots in both sides. first just the slots on one side, then the slots including the backing board and the outlines on the second side. The thin stip in the centre is not to be cut but the 3 holes drilled in it are used to align the piece on the second side.

The Cell PC

A custom PC case

Clamp-Z-Axis-Ridgid

Clamp-Ridgid R22002

Dolley 20 inch

Five wheel Dolley. Files generated using Onshape and Kiri Moto. All files for this project were generated using ONSHAPE. Here is a link to a great video that will get you started using Onshape and Kiri Moto. https://www.youtube.com/watch?v=mt2JFI3vJso All files are available in ONSHAPE: https://cad.onshape.com/documents?resourceType=filter&nodeId=1&column=modifiedAt&order=desc&viewMode=0

Indi the Dingo Bitch Circumnavigates the Globe

Use maslow cnc to build a plane, then get my human pet to fly me about the world.

Pine Ipod Case

Ipod case made with .75 inch pine

Bucket Stand

Stand that holds a bucket or flower pot or anything else that is about 10.5 inches and tapered.

Edge Clamp Connector

Clamp style connector allowing you to join the edges of plywood or other materials together.

Baby Yoda

Baby Yoda

Santa Sleigh

Full Size Santa Sleigh

https://forums.maslowcnc.com/t/full-size-santa-sleigh/7766/11

Biplane

Child's ride on Biplane

Minecraft Sword and Axe

Files for a toy sword and axe which look like they are from the game Minecraft

Spool for Cable, Rope, Chain, etc.

Spool ends to tidy up Cable, Rope, Chain, etc.