FilesEdit this page
Designed in gimp and inskcape.
g-gode generated in easle.
cut with metal-maslow with 1/4 inch bit on 1/2 inch plywood.
InstructionsEdit this page
BabyYoda.nc gcode built with Easle using imported babyyoda.svg - BabyYoda.nc is designed to be used with 1/2 inch plywood and a 1/4 inch bit. Tested and cut well.
1/2 inch plywood at least 17 x 17 inches 1/4 inch upcut or downcut bit.